[Issue] Draw dimension line bug
Posted: Tue Mar 30, 2021 2:19 pm
Windows 10, OOv4.1.7
OpenOffice Draw, Drawing scale 1:50, Units = millimetre
Dimension line - draw horizontal line, any dimension.
Select line > right-click > "Position and Size..."
Note that the Width field reflects the text shown on the dimension line
Change Width to a sub-metre value - e.g. 590 - > OK
Go back in to "Position and Size..." and note Width has been changed to some other value (e.g. 1,760 mm) although dimension line text still "590 mm".
It goes downhill from there.
Does not happen with "normal" lines, seems specific to Dimension lines.
Can anyone corroborate, or correct me, please?
OpenOffice Draw, Drawing scale 1:50, Units = millimetre
Dimension line - draw horizontal line, any dimension.
Select line > right-click > "Position and Size..."
Note that the Width field reflects the text shown on the dimension line
Change Width to a sub-metre value - e.g. 590 - > OK
Go back in to "Position and Size..." and note Width has been changed to some other value (e.g. 1,760 mm) although dimension line text still "590 mm".
It goes downhill from there.
Does not happen with "normal" lines, seems specific to Dimension lines.
Can anyone corroborate, or correct me, please?